2020 Jeep Renegade Towing Capacity & Specs
TL;DR Summary
The 2020 Jeep Renegade delivers agile subcompact SUV adventure, featuring a conventional towing capacity of 2000 lbs and a maximum payload rating of 1376 lbs. Powered by efficient inline-four engines with available Trailer Tow Group and 4WD, it provides practical pulling power for lightweight weekend gear.
Trim specifications
All weights in pounds. Ratings depend on the trim and towing configuration.
| Trim / Package | Engine / Fuel | Max Towing | Max Payload | GCWR | GVWR | Curb Weight | Tongue Weight |
|---|---|---|---|---|---|---|---|
| Sport / Latitude / Altitude (4WD w/ Trailer Tow Group) | 2.4L I4 Gas |
2,000 lb | 1,376 lb | 5,500 lb | 4,586 lb | 3,166 lb | 200 lb |
| Limited / Trailhawk / High Altitude (4WD w/ Trailer Tow Group) | 1.3L Turbo I4 Gas |
2,000 lb | 1,376 lb | 5,500 lb | 4,586 lb | 3,320 lb | 200 lb |
In-Depth 2020 Jeep Renegade Towing Review
The 2020 Jeep Renegade towing capacity reaches a certified limit of 2000 lbs across its subcompact crossover lineup when equipped with the factory Trailer Tow Group, offering versatile utility for small pop-up campers, personal watercraft, dirt bike haulers, and lightweight utility trailers. Daily driving performance and trailering ability are supported by two distinct powertrain and torque specs paired with a responsive nine-speed automatic transmission. The standard 2.4L Tigershark MultiAir2 inline-four engine produces 180 horsepower at 6400 RPM and 175 lb-ft of torque at 3900 RPM, while the available 1.3L direct-injection turbocharged inline-four engine generates 177 horsepower at 5750 RPM and an impressive 200 lb-ft of torque at 1750 RPM for responsive low-end pulling power. Across both four-wheel-drive configurations, the Renegade max payload rating is certified at 1376 lbs, ensuring abundant capacity for gear, tools, and passengers. Structural operating limits are anchored by Gross Vehicle Weight Ratings (GVWR) between 4586 and 4600 lbs, while unladen factory curb weights range from 3166 to 3532 lbs depending on trim appointments and underbody protection.
Engineered with a high-strength steel unibody chassis and Koni frequency selective damping front and rear struts, factory tow package specifications include a Class III receiver hitch and a 4-pin trailer wiring harness connector designed to integrate seamlessly with onboard vehicle electronics. Across the entire lineup, the Gross Combination Weight Rating (GCWR) is rated at 5500 lbs, with a maximum certified static hitch tongue weight limit of 200 lbs to preserve vehicle steering precision, braking balance, and tire traction. Integrated chassis systems including electronic stability control, all-speed traction control, electronic roll mitigation, and specialized trailer sway damping actively counteract trailer oscillations in gusty highway conditions. Available in Sport, Latitude, Altitude, Limited, High Altitude, and trail-rated Trailhawk trim levels equipped with the Jeep Active Drive low-range 4x4 system and Selec-Terrain drive modes, the 2020 Renegade delivers distinct styling, agile off-road capability, and practical light-duty towing capability.
Frequently Asked Questions
What is the maximum conventional towing capacity and hitch tongue weight limit for the 2020 Jeep Renegade?
When properly equipped with the factory Trailer Tow Group, the 2020 Jeep Renegade has a certified maximum conventional towing capacity of 2,000 lbs and a maximum static hitch tongue weight limit of 200 lbs across both 4WD engine configurations. This rating allows safe towing of small pop-up campers, light utility trailers, dirt bike carriers, or small watercraft.
What engine choices and performance output ratings are available on the 2020 Jeep Renegade?
The 2020 Jeep Renegade offers two distinct 4-cylinder engines paired with a 9-speed automatic transmission. The standard 2.4L Tigershark MultiAir2 I4 engine produces 180 HP at 6,400 RPM and 175 lb-ft of torque at 3,900 RPM. The available 1.3L direct-injection Turbocharged I4 engine outputs 177 HP at 5,750 RPM and a higher 200 lb-ft of torque at an accessible 1,750 RPM for improved low-end pulling power.
What are the payload capacity, GVWR, and curb weight specifications for the 2020 Jeep Renegade?
Across all tow-equipped 4WD models, the 2020 Jeep Renegade offers a maximum payload capacity of 1,376 lbs. The vehicle's Gross Vehicle Weight Rating (GVWR) spans from 4,586 to 4,600 lbs, with unladen factory curb weights ranging between 3,166 and 3,532 lbs depending on trim features and underbody skid plate protection.
What is the Gross Combination Weight Rating (GCWR) for the 2020 Jeep Renegade?
The Gross Combination Weight Rating (GCWR) for the 2020 Jeep Renegade with factory Trailer Tow Group is certified at 5,500 lbs. This rating defines the absolute legal boundary for the total combined weight of the crossover, driver, passengers, cargo, and fully loaded conventional trailer.
What factory towing hardware and stability controls are included on the 2020 Jeep Renegade?
Equipped with the factory Trailer Tow Group, the 2020 Jeep Renegade includes a Class III receiver hitch and a 4-pin wiring harness that integrates with onboard electronic systems. Dynamic trailering stability is reinforced by electronic stability control, all-speed traction control, electronic roll mitigation, and trailer sway damping that counteracts trailer yaw while respecting the vehicle's 200-lb tongue weight limit.
Always confirm ratings for your exact configuration with the manufacturer and vehicle certification labels. Passenger, cargo and trailer tongue weight affect payload and towing limits.
You might also be interested in
Other 2020 vehicles in the light towing class.